Faran’s “Titan Promax” uses Online Double Conversion / High Frequency UPS technology and protects equipment against mains fluctuations, sudden voltage changes, common-mode noise, phase faults, lightning and similar disturbances. With a capacity of 10,000 VA, this product is suitable for banks, medical centers, IT centers, security systems, quality-control equipment and offices. Depending on battery capacity and charging time, it can supply backup power after an outage. Output voltage is selectable at 208/220/230/240 V; rated input is 208/220/230/240 V, input range is 110–300 V, output frequency is 50 or 60 Hz and input frequency range is 40–70 Hz. The front-panel display shows battery capacity, load, input/output voltage and frequency, and other operating values. The time required to fully charge the batteries depends on battery capacity. Operating temperature is 0–40°C and operating noise is below 55 dB. Faran Titan Plus features a wide input range, Online High Frequency UPS technology, true sine-wave output with THD below 2% at linear load, advanced battery management (ABM), automatic charging with inverter off, EMI/RFI filters, advanced PFC and network-based UPS monitoring. The unit includes a DSP processor with Cold Start and ECO Mode. It has no internal battery and requires 16–20 external battery cells.
تماس بگیرید
149 in stock
| CAPACITY | 10 kVA/10 kW | |||
| INPUT | ||||
| Input wiring | Single-phase three-wire (1Փ + N+PE) | |||
| Rated voltage | 208 / 220 / 230 / 240 Vac | |||
| Voltage range | 110 ~176 Vac (linear derating between 50% and 100% load): 176~ 288 Vac (no derating) |
|||
| Rated frequency | 50 / 60 Hz (auto-sensing) | |||
| Frequency range | 40 ~ 70 Hz | |||
| Power factor | ≥0.99 | |||
| Bypass voltage range | -40% ~ +15% (settable) | |||
| Total harmonic distortion (THDi) | ≤5% | |||
| OUTPUT | ||||
| output wiring | Single-phase three-wire (1Փ + N+PE) | |||
| Rated Voltage | 208 (PF=0.9) / 220 / 230 / 240 Vac | |||
| Voltage regulation | ± 1% | |||
| Frequency | Synchronized to bypass in mains mode; 50/60 Hz± 0.1% in battery mode | |||
| Waveform | Sinusoidal | |||
| Power factor | 1 | |||
| Total harmonic distortion (THDV) | ≤ 1% (linear load); ≤ 4% (non-liner load) | |||
| Crest factor | 3:1 | |||
| overload | 105%~110% for 10 min 110%~125% for 1 min 126% ~ 150% for 30 s |
|||
| BATTERIES | ||||
| DC voltage | 192 VdC(192~240 Vdc settable) | |||
| Number of battery | 16 Pcs (16 ~20 settable) | |||
| Inbuilt battery (standard model) | 12V-9Ah*20 / 12V-9Ah*16 | |||
| Charging current | Standard model:1 A; Long time model: 5A(default), 1~5 A settable, 12A(optional) | |||
| Recharge time | Standard model: 90% capacity restored in 8 hours: Long time model: depend on the capacity of battery |
|||
| SYSTEM | ||||
| Efficiency | ≥94% at 100% load,max. 95% at 60% load. ≥98% in ECO mode | |||
| Transfer time | 0 ms | |||
| Protections | Short-circuit, overload, overtemperature, battery low voltage, overvoltage, undervoltage and fan failure |
|||
| Max,number of parallel connections | 4 | |||
| Communications | RS232 (standard), USB / RS485 / dry contacts / SNMP /battery temperature compensation (optional) |
|||
| Disply | LCD+LED | |||
| OTHERS | ||||
| Operating temperature | 0˚C ~ 40˚C | |||
| Storage temperature | -25˚C ~ 55˚C (without battery) | |||
| Relative humidity | 0 ~ 95% (non-condensing) | |||
| Altitude | ≤1000 m, derating 1% for each additional 100 m | |||
| IP rating | IP 20 | |||
| Noise level at 1 m | ≤58dB | |||
| Dimensions (W × D × H)(mm) | 191×495×711 (S) , 191×495×350 (H) | |||
| Packaged dimensions(W × D × H)(mm) | 310×685×941 (S) , 318×617×475 (H) | |||
| Net weight (kg) | 62 (S) , 16.5 (H) | |||
| Gross weight(kg) | 70 (S) , 18 (H) | |||
Reviews
There are no reviews yet.